bagger Bars about a quote from the film Bagger Vance?
in the film i remember a scene where Matt Damon describes the different stages of getting drunk, to a boy in a bar. It was something like the more you drink the more deaf you become and thats why you get louder, and so on. I thought the whole description was quite good and wondered if anyone here might know it all, or where i might find it?
Rannulph Junnah: That's right Hardy. You see every drink of liquor you take kills a thousand brain cells. Now that doesn't much matter 'cos we got billions more. And first the sadness cells die so you smile real big. And then the quiet cells go so you just say everything real loud for no reason at all. That'ok, that's ok because the stupid cells go next, so everything you say is real smart. And finally, come the memory cells. These are tough sons of bitches to kill.
Drag Specialties 1-1/4" Buffalo Bars For 08-09 H-D Touring models with electronic throttle control Chromed handlebars Knurled, drilled, machined for internal wiring Accept stock H-D controls and handlebar clamp Made in the U.S.A. Available in 10", 12", 14" heights and are 40 ?" wide for FLHT/FLHX models 12?", 14", 16", 18" Ape Hangers, Bagger Style, and Road Glide Style for FLHR/FLTR models 12?" Ape Hanger- 36" wide 14" Ape Hanger- 39" wide 16" Ape Hanger- 39?" wide 18" Ape Hanger- 40" wide Bagger Style- 34?" wide Road GlideStyle- 31" wide For 1-1/4" Buffalo risers Click Here **Closeouts are limited to stock on hand**
Drag Specialties 1 ? " Big Buffalo Bars 1-1/2" diameter chrome-plated handlebars for the "biggest fattest" look. Custom bends for the ultimate in comfort 1.5" bars taper to 1" at the grip/control area Drilled and dimpled for stock Harley Davidson controls and fit most metric controls with little to no adaptation` Ape Hanger, Classic and Bagger bars MUST USE special risers that accept 1 1/2" Made in the U.S.A. For 1-1/2" Big Buffalo risers Click Here For Custom grips Click Here Dimensions: Drag- Width: 31", Center: 8.5", Pullback: 6" Bikini- Width: 33", Center: 8.5", RISE: 4.5", Pullback: 14.75" Beach - Width: 36", Center: 8 ?", Pullback: 14-3/4" T-Bars - Width: 31", Center: 8 ?", Pullback: 6"-8" Classic - End Rise: 3", Width: 36", Center: 8", Pullback: 10" Bagger - End Rise: 7", Width: 35", Center: 10", Pullback: 14" Ape Hangers- End Rise: 13", 16", 18", Width: 41", Center: 10", Pullback: 9.75"
Bassani Bagger True Dual Headers True Dual Head Pipes with Heat Shields 02 Sensor port plugs included Right Side Pipe follows same clean lines as frame Show chrome finish Works with stock and most aftermarket 95-09 mufflers Mounting instructions Included Made in the USA Click Here for Additional Exhaust Information
S&S Cycle Power-Tour Bagger Slip-On Mufflers 3-1/2" performance mufflers fit on the stock header pipes of 1995-up Harley-Davidson® bagger models Perfect for stock or modified engines A great complement to an S&S air cleaner kit, camshaft, or any other performance upgrade Also available in Quiet-Tour, a quieter version Billet end caps are engraved with the S&S logo, and are available chrome plated or coated with black Teflon Click Here for Quiet-Tour mufflers Click Here for Additional Exhaust Information
Vance & Hines Dual Bagger Exhaust is designed for use with touring cruisers Power, performance and great sound for Japanese touring cruisers Oversized 4 in. mufflers featuring 220 degrees full cover Full length headpipe heat shields that virtually eliminate blueing for new looking, show quality pipes for many years to come Comes complete with all necessary mounting hardware and instructions Carburetor re-jetting may be necessary for optimum performance This is a 2:2 dual exhaust which exits one pipe on each side of the motorcycle, under the saddlebags End caps are not included and not used on this system Mufflers are 4 in. diameter slash-down style Actual product may vary from web image Click Here for Additional Exhaust Information
S&S Cycle Quiet-Tour Bagger Slip-On Mufflers 3-1/2" mufflers fit on the stock header pipes of 1995-up Harley-Davidson® bagger models Perfect for stock or modified engines A great complement to an S&S air cleaner kit, camshaft, or any other performance upgrade Also available in Power-Tour, the performance version Billet end caps are engraved with the S&S logo, and are available chrome plated or coated with black Teflon Sold in pairs Made in the U.S.A. Click Here for Power-Tour mufflers Click Here for Additional Exhaust Information
S&S Cycle Quiet-Tour Tapered Bagger Slip-On Mufflers 3-1/2" mufflers fit on the stock header pipes of 1995-up Harley-Davidson® bagger models Perfect for stock or modified engines A great complement to an S&S air cleaner kit, camshaft, or any other performance upgrade Sold in pairs Made in the U.S.A. Click Here for Power-Tour mufflers Click Here for Additional Exhaust Information
Klock Werks WFB Benchmark Bagger Front Fender Blocks Machined from billet aluminum and available in a chrome or raw finish Less is more in this minimalist part that provides perfect spacing for your Road King, Road Glide, Street Glide or Ultra project Besides being used with Klock Werks’ Benchmark Front Fenders, they can be used for a variety of custom applications The spacers are 0.750” thick and hole spacing is 3” on center to fit FLT or FLHT style forks Sold in pairs Made in the U.S.A. CLICK HERE for more Klock Werks Products
Show Chrome Highway Bars Chrome steel-tube highway bars Accommodate 1-1/4" clamps for mounting pegs Mount to existing frame holes **Note: Item may differ from image depending on bike make and model. **Note: Highway bars for Yamaha V Star 650 will not fit models with floorboards.
Cobra Freeway Bars Help protect against accidental drops and look great doing it CNC-machined, chrome-plated mild steel for durability Custom-fit to each model for hassle-free installation Works with all Cobra accessories including lightbars and floorboards 1-1/4" diameter tubing Made in the U.S.A.
Drag Specialties Big Buffalo Saddlebag Bars Big Buffalo Saddlebag Bars are 1-1/4" in diameter which gives that beefier look and match the 1-1/2” Big Buffalo Engine Bars. Rear bars are made from 1.25" diameter steel tubing Available with a brilliant show-chrome or black powdercoat finish Made in the U.S.A.
Custom Dynamics Light Bars Light up the night with 12 high-power dual intensity LEDs. In running light mode the LEDs?emit a low intensity but highly visible light.?Custom Dynamics Light Bars?are available?with?or without the Flashing Brake Alert mode.?When the brake on the Flashing Brake Alert model?is applied the LED will flash at a high intensity?for 5-6 seconds then go to a solid state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit is extremely easy to install with 3M tape and a 3-wire color coded electrical installation. Simply connect the Black wire to any ground wire, the Red wire to your existing brake light wire and the Blue to an existing running light power source. Works with any 12V DC electrical system without the need for load equalizers or resistors. Features: Features 12 super bright LEDs 3M double-sided tape for easy mounting 3-wire color coded easy-to-follow electrical installation "Knight Rider" side-to-side sequenced running light. Available in Non-Flash and Flash brake alert. Works with any 12V DC system No load equalizers or resistors required Dimensions: 4.7"L x .7"W x .7"H **Note: Knight Riderz Light bars can be wired independently, for example: If you only want to use the running light function simply cap off the brake light wire If you only want to use the brake light function simply cap off the running light wire
Drag Specialties Big Buffalo Engine Bars Big Buffalo Bars are 1-1/2" in diameter and give that beefier look. Front bars are made from 1-1/2" diameter steel tubing Available with a brilliant show-chrome or black powdercoat finish Made in the U.S.A.
Jardine Black Rear Highway Bars Constructed of durable 4130 cromoly Black finish Tube diameter: 7/8 in. Made in the U.S.A. **CAUTION: Highway bars are designed for appearance only and may provide only a small amount of protection for the motorcycle Highway bars are not intended to provide bodily protection in any circumstance
Jardine Chrome Rear Highway Bars Constructed of durable 4130 cro-moly Show-chrome finish Tube diameter: 7/8 in. Made in the U.S.A. **CAUTION: Highway bars are designed for appearance only and may provide only a small amount of protection for the motorcycle Highway bars are not intended to provide bodily protection in any circumstance
Jardine Black Front Highway Bars Black finish for show-bike looks Constructed of durable 4130 chromoly Front bars Tube diameter: 1 1/4" Made in the U.S.A. **CAUTION: Highway bars are designed for appearance only and may provide only a small amount of protection for the motorcycle Highway bars are not intended to provide bodily protection in any circumstance **Note:? Item is bike specific, may vary from image
Jardine Chrome Front Highway Bars Brilliant chrome finish for show-bike looks Constructed of durable 4130 chromoly Show-chrome finish Front bars Tube diameter: 1 1/4" Made in the U.S.A. **CAUTION: Highway bars are designed for appearance only and may provide only a small amount of protection for the motorcycle Highway bars are not intended to provide bodily protection in any circumstance
Adapter Kits for Risers and T-Bars Bolt kits for threaded risers and T-bars Custom made to fit certain bikes Fit euro style risers and T-bars with 1/2"-13 threads
Vortex Clip-On Road Race Bars Race proven technology CNC machined from solid block aerospace aluminum Stainless fasteners Inexpensive replaceable bars For universal fit order by size of fork tube in mm **Closeouts are limited to stock on hand**
Barrel luggage Shipping package home to Jamaica: Best, cheapest, fastest, safest way.?
I am going home in a week and can't get all my stuff to hold in my allowed luggage. I need to ship the extras - a few work suits, shoes and handbags. They are mixed - new and used, so I am hoping to find a way that cuts down on the duties for clearing them.
I also need a cheap way that will not cost an arm and leg. Of course safety is important. I know the penchant for stuff to turn up missing.
I am looking to send a medium sized box. I have considered USPS - regular post office international package, Air Jamaica Cargo and freight forwarders e.g. the people that ship barrels. Know any good ones in the DC area?
Air Jamaica cargo is NOT bad at all. I would warn you that right now is NOT a good time to be trying to avoid paying duties. You could end up paying HUGE fines for even underqouting the value of stuff by 10%.
Try to carry all NEW or expensive items in your luggage when you travel. This will also protect you from some amount of theft risk.
Parts Unlimited Barrel Bag Constructed with 1000-denier nylon material Two extra long 19", heavy duty, 1" wide straps with adjustable buckles for universal mounting Measures: 5"diameter x 10"L Click Here for Additional Luggage Information
Mounted with military spec nylon strapping and Fastex buckles Tough polyethylene liner to maintain shape and provide easy access YKK zippers with two rows of stitching Capacity: 9.05" x 4.75" x 4.75" 214 cubic inches or 3.5 liters of space Click Here for Additional Luggage Information
Tour Master Cruiser II Barrel Sissybar Bag The Tour Master Cruiser II Bag Collection is a group of handsome travel bags that are every bit as rugged as they are good looking. Offering significant storage space, each bag is built from a unique synthetic material that has the look and feel of heavy-grained, top-quality leather .... but is actually better. Features: Incredibly durable and practically maintenance free, bags resist stain, mildew and rust Universal sissybar mounting system fits tall, low, narrow or wide padded back rests Quick release buckles are hidden behind traditional chrome buckles for easy opening and closing Box style lids for optimum water and dust protection Reinforced construction assures shape retention Rain / dust cover included to offer protection from the elements Bag contact points are covered by an inner Neoprene layer to protect the motorcycle Barrel bag is removable and replacements are sold separately Saddlebags easily remove from the mounting yoke by a zipper removal system 8.5"H x 15.5"W x 9.5"D 1252 cubic in. capacity Click Here for Additional Luggage Information
Tour Master Cruiser II Barrel Sissybar Bag with Rivets The Tour Master Cruiser II Bag Collection is a group of handsome travel bags that are every bit as rugged as they are good looking. Offering significant storage space, each bag is built from a unique synthetic material that has the look and feel of heavy-grained, top-quality leather .... but is actually better. Features: Incredibly durable and practically maintenance free, bags resist stain, mildew and rust Universal sissybar mounting system fits tall, low, narrow or wide padded back rests Quick release buckles are hidden behind traditional chrome buckles for easy opening and closing Box style lids for optimum water and dust protection Reinforced construction assures shape retention Rain / dust cover included to offer protection from the elements Bag contact points are covered by an inner Neoprene layer to protect the motorcycle Barrel bag is removable and replacements are sold separately Saddlebags easily remove from the mounting yoke by a zipper removal system 8.5"H x 15.5"W x 9.5"D 1252 cubic in. capacity Click Here for Additional Luggage Information
Show Chrome Optional Luggage Rack The elegantly styled sissy bar luggage rack is designed to hold all sizes of luggage bags from small to bulky Works only with the Show Chrome Sissy Bar Kits
Kuryakyn Luggage Rack Now you can have a convenient place to secure your luggage without cluttering up the clean lines of your bike This sleek, contoured, die-cast rack is beautifully chrome-plated and incorporates raised rubber inserts to protect the surface and keep the load from shifting The rack has approximately 70 square inches of usable area providing a stable platform for most bags without looking like the roof rack of a mini-van **Note: Installation requires relocation of license plate when use on Road King, Road Glide, or FLHT Standard
Kolpin ATV Luggage Rain Cover Kolpin's heavy-duty, waterproof PVC cover is an inexpensive way to keep your luggage looking new, clean and most importantly dry! The sealed seams provide your luggage additional durability, waterproofing and protection from mud, dust and rain. Elastic draw cord secures the cover to your luggage and ATV rack quickly and securely. Rain cover easily wipes clean trail ride after trail ride, but must be removed before transport. Features: Medium: Fits ATV luggage 30" x 14" x 10" or smaller Large: Fits ATV luggage 34" x 24" x 12" or smaller Protects luggage from mud, dust and rain Elastic draw cord secures the cover to the luggage and ATV rack Sealed seams provide durability and waterproofing Click Here for Additional Luggage Information
Motherwell Products 7" Solo Luggage Rack Solo Luggage Rack is a bigger and beefier rack that still maintains style and matches perfectly with larger rear fenders. Outside rails made of heavy .065 tubing; inside rails are 3/8" solid steel Measures 12 1/4" L x 7" W
Dowco Rally Pack Luggage Set Universal motorcycle backpack Constructed of durable, weather-resistant heavy-duty polyester Includes a jumbo backpack, a roll bag, a vinyl roll bag liner and an attachable bungee net Fits most sissy bar and motorcycle luggage rack combinations Fastens quickly and simply with reliable hook and loop strap closures Jumbo Pack = 17"H x 14.5"W x 10"D Roll Bag = 9.5"H x 14"W x 9.5"D Click Here for Additional Luggage Information
Motherwell Products USA 2-Up Backrest Luggage Rack Chrome-plated rack made of 5/8” steel tubing; holds up to 10lb. Sissy bar and backrest not included
Moose Racing Expedition Luggage Rack System A complete luggage system with rear top rack, side mounts, and universal mounting brackets. Features: System has multiple mounting points to distribute the load equally around the rear sub frame of the motorcycle Steel construction with powder coated finish Luggage system is light weight to maximize load capacity System comes with universal brackets to mount Expedition Side Cases by Pelican (sold separately) Universal mounting brackets allow other types of cases to be used with the Expedition Luggage System Quick disconnect using a spring and pin design. Easy on, easy off On some models, rear turn indicators may need to be relocated All required hardware is included for installation Made in the USA *Note: As stated above, rack system does not come with Pelican cases (sold separately)
Drag Specialties Fender Mounted Luggage Rack Chrome replica of the fender-mounted rack that came stock on 41-57 FL models Fits any FL or FLH rear fender Mounting hardware not included
Drag Specialties Fender Luggage Rack Chrome-plated rack made of 3/8" steel tubing; carries up to 10 lb. Mounts to stock seat mounting screw and license plate bracket Mounting hardware and instructions included
Arlen Ness Double Barrel Air Filter Assembly Leading-edge designed air filter assembly available in chrome or powder-coated black wrinkle finish Includes aluminum double barrel outer cover, aluminum radius inlet backing plate, reusable/washable pre-oiled hi-performance air filter All necessary hardware included
Show Chrome Optional Luggage Rack The elegantly styled sissy bar luggage rack is designed to hold all sizes of luggage bags from small to bulky Works only with the Show Chrome Sissy Bar Kits
Kuryakyn Luggage Rack Now you can have a convenient place to secure your luggage without cluttering up the clean lines of your bike This sleek, contoured, die-cast rack is beautifully chrome-plated and incorporates raised rubber inserts to protect the surface and keep the load from shifting The rack has approximately 70 square inches of usable area providing a stable platform for most bags without looking like the roof rack of a mini-van **Note: Installation requires relocation of license plate when use on Road King, Road Glide, or FLHT Standard
Kolpin ATV Luggage Rain Cover Kolpin's heavy-duty, waterproof PVC cover is an inexpensive way to keep your luggage looking new, clean and most importantly dry! The sealed seams provide your luggage additional durability, waterproofing and protection from mud, dust and rain. Elastic draw cord secures the cover to your luggage and ATV rack quickly and securely. Rain cover easily wipes clean trail ride after trail ride, but must be removed before transport. Features: Medium: Fits ATV luggage 30" x 14" x 10" or smaller Large: Fits ATV luggage 34" x 24" x 12" or smaller Protects luggage from mud, dust and rain Elastic draw cord secures the cover to the luggage and ATV rack Sealed seams provide durability and waterproofing Click Here for Additional Luggage Information
Motherwell Products 7" Solo Luggage Rack Solo Luggage Rack is a bigger and beefier rack that still maintains style and matches perfectly with larger rear fenders. Outside rails made of heavy .065 tubing; inside rails are 3/8" solid steel Measures 12 1/4" L x 7" W
Dowco Rally Pack Luggage Set Universal motorcycle backpack Constructed of durable, weather-resistant heavy-duty polyester Includes a jumbo backpack, a roll bag, a vinyl roll bag liner and an attachable bungee net Fits most sissy bar and motorcycle luggage rack combinations Fastens quickly and simply with reliable hook and loop strap closures Jumbo Pack = 17"H x 14.5"W x 10"D Roll Bag = 9.5"H x 14"W x 9.5"D Click Here for Additional Luggage Information
Motherwell Products USA 2-Up Backrest Luggage Rack Chrome-plated rack made of 5/8” steel tubing; holds up to 10lb. Sissy bar and backrest not included
Moose Racing Expedition Luggage Rack System A complete luggage system with rear top rack, side mounts, and universal mounting brackets. Features: System has multiple mounting points to distribute the load equally around the rear sub frame of the motorcycle Steel construction with powder coated finish Luggage system is light weight to maximize load capacity System comes with universal brackets to mount Expedition Side Cases by Pelican (sold separately) Universal mounting brackets allow other types of cases to be used with the Expedition Luggage System Quick disconnect using a spring and pin design. Easy on, easy off On some models, rear turn indicators may need to be relocated All required hardware is included for installation Made in the USA *Note: As stated above, rack system does not come with Pelican cases (sold separately)
Drag Specialties Fender Mounted Luggage Rack Chrome replica of the fender-mounted rack that came stock on 41-57 FL models Fits any FL or FLH rear fender Mounting hardware not included
Drag Specialties Fender Luggage Rack Chrome-plated rack made of 3/8" steel tubing; carries up to 10 lb. Mounts to stock seat mounting screw and license plate bracket Mounting hardware and instructions included
Quadboss Duo Rear Luggage Dual lockable storage compartments Soft foam cushion Mounts with either quick release or permanent systems Ideal for rider to rest on trails Padded area is not for passenger use or for rider while ATV is moving 36" W x 16" H x 18" D Click Here for Additional Luggage Information
Drag Specialities Sissy Bar Luggage Rack Use this to secure luggage or support a T-Bag Mounts to any bike with a tall, Square Drag Specialties Sissy Bar , with holes for insertion in the crossbar (mounting holes must be 1.75 in. to 2.0 in. on center) Also mounts to tall, square OEM sissy bars with mounting holes 1.75 in. on center Easy to install and remove Mounting hardware included (sissy bar not included)
Saddlemen Tour Pack Luggage Bag Handsome, but rugged luggage bag is designed to fit neatly into King or Chopped Tour Packs and matches the appearance of Saddlemen's other bagger accessories. Multiple storage and organizer sections with a full-side main compartment opening so you have easy access to your stuff even when the luggage bag is in the Tour Pack. Special shape accommodates Tour Packs with molded liners, light housings and radio antennas. Sturdy grip handle for convenient carrying - included shoulder strap allow you to carry the ease. Fully lined with full-circumference, sturdy zippers that permit over packing but keep the elements away from your cargo. Great for trips, overnighters, and organizing your gear. Simply lift your luggage bag out of the Tour Pack to move your cargo easily into the hotel, campground or to unload fast once you're home. Measures: 22?" x 7?" x 15" Fits into King or Chopped Tour Packs Click Here for Additional Luggage Information
Drag Specialties Bobtail Luggage Rack Rack follows the contours of the stock bobtail fenders on FXST/ FXD models Features positive attaching points for bungee straps on front loops and back panel Made in the U.S.A. **Note: Original screw attaching rear of seat must be removed to install this rack
By popular demand, we now offer a kit to raise your Luggage Rack by 5/8"- and gives you a larger diameter footprint. This will make cleaning under your rack easier as well as spread the load a bit. Reuses stock mounting holes if you already havea luggage r
Tour-Pak Luggage Rack from Khrome Werks Made specifically to match the lines of the stock Tour-Pak Constructed of ?? dia. tubing with a polished nickel chrome finish Integrated tie-down loops for bungee hooks 10lb. load capacity Measures 12? L x 20? W Mounting hardware and decorative emblem included Made in the U.S.A.
MotoCentric Mototrek Sport Saddlebags The MotoCentric Mototrek Sport Saddlebags are functional, and are extremely easy to mount. Saddlebags feature a large main center compartment and a side pocket for things you need to get to quickly. Bags are designed to keep its hard-bodied aerodynamic shape even when empty and in the most grueling conditions or speeds. Saddlebags feature quick release buckles to pair it with MotoCentric's Mototrek Roll Tail Bag or Mototrek Sport Tail Bag to create a "full matching luggage set". This is a piece of luggage made with the highest quality materials and accessories and is mostly targeted for sport/sport touring bikes. All MotoCentric motorcycle luggage comes with a Lifetime Warranty Features: 1680D Maxtura? ballistic construction for durability Dual quick opening top zippers Duraflex? buckles throughout for added strength Reflect-A-Light? reflective piping for added visibility Scratch-resistant rubberized mounting pads are included to protect your ride Heat shield on the bottom of bags to prevent pipe burn Rain cover included Comfortable carrying handles Quick release side straps Dimensions: 10.5"H x 16"W x 7"L Capacity: 22 Liters per side / 26 Liters per side expanded Saddlebag Mounting Instructions Click Here for Additional Luggage Information
Gears Saddlebags Heavy duty 1200-denier Technolast, UV treated polyester construction with polyurethane coating to resist mildew Large main compartment with rigid inner supposrts and two side pockets Rugged rubber handles Covered zippers with rubber puller tabs Reflective back strip Fastex quick release buckles Measures: 14-1/2"L x 7-1/2"W x 11-1/2"H Click Here for Additional Luggage Information **Closeouts are limited to stock on hand**
Saddlemen Desperado Saddlebags Desperado? Saddlebags from Saddleman New nostalgic-look saddlebags available in three sizes Made of a durable combination of materials including genuine leather, marine grade vinyl, chrome-plated brass and tough plastic frame All feature bright chrome studs, chrome buckles and genuine leather straps with lockable, quick-release hidden buckles Available in Throw-Over mounting which quickly releases saddlebags from bike; carry handle included Saddlebag support brackets recommended Jumbo= 18" L x 11.5" H x 6.25" D Large= 15" L x 10.5" H x 5.75" D Medium= 11" L x 9 1/2" H x 5 1/4" D Click Here for Additional Luggage Information
Givi Xstream T474 Saddlebags GIVI Xstream Saddlebags are designed with the motorcycle rider in mind. Style and quality make these saddlebags and instant hit for all enthusiasts. Expandable from 26 to 35 liters Rain cover and waterproof zippers keep the wet out Easy carry out dry pack inside saddlebags Reinforced walls to keep shape when empty Dimensions: 10.6"H x 17.7"L x 8.7-11.4"W Click Here for Additional Luggage Information
For optional over or under the seat installation of universal saddlebags Available for standard or large universal rigid mount saddlebags Click Here for Additional Luggage Information
Tour Master Select Saddlebags Introducing the new Tour Master Select line of motorcycle luggage - designed for motorcyclists who refuse to compromise on features but know a good value when they see it. The Tour Master Select Saddlebags offers features seen on more expensive lines of luggage. Features: Heavy duty, 600 denier Carbolex and 1680 denier ballistic nylon construction Adjustable mounting yoke can be permanently mounted under the seat of some motorcycles Bags have removable neoprene layers to help protect the motorcycle Hinged lid provides easy access to the main compartment and offers additional storage space Phoslite dark colored reflective piping provides nighttime visibility Convenient carrying handles Internal support panels hold the shape of the bag when empty or full Rain/dust cover is included and easily stores in the lid mesh pockets External side pockets offer additional, easy-access storage space Integrates with Tour Master Select Tail Bag 15" L x 5.5" W x 11" H (12 Liters each bag) Click Here for Additional Luggage Information
Cortech Sport Saddlebags 1680 Denier ballistic nylon construction for durability Protective heat shield on lower section of bags helps to prevent pipe burn (minimum clearance of 2" required) Neoprene strap and side pads help to protect the motorcycle's finish Zippered side pocket on each bag Scotchlite 3M Reflective Tour Master logo & striping Internal support panels Quick release mounting system Rain Covers included Convenient carrying handles TPR zipper pulls 12"H x 15"W x 7"D Click Here for Additional Luggage Information
National Cycle Cruiseliner Saddlebags Permanently attached lids are hinged in the front and swing forward for easy access to the interior 1-1/4" tight fitting seals conform to the shape of the lid to keep the elements out A keyed push button lock is recessed into the lid Mount to the Cruiseliner Mounting Brackets for a perfect fit
Gears Three Saddlebags Heavy duty 1200-denier Technolast, UV treated polyester construction with polyurethane coating to resist mildew Large main compartment with rigid inner supposrts and two side pockets Rugged rubber handles Covered zippers with rubber puller tabs Reflective back strip Fastex quick release buckles Measures: 19-1/2"L x 11"W x 11"H Click Here for Additional Luggage Information
Moose Racing Expedition Saddlebags Made of semi-rigid formed 600-denier SaddletuffTM and foam shell Unique water-resistant zippers make these bags ideal for nasty weather Nylon stabilizing straps secure bags to a turn signal, bungee hook or frame tube Feature internal mesh pockets, zippered expansions and stylish 3-D accents. Formed shell opens completely with a three sided zipper 17"L x 10"T x 6D and expands to 8"D
Power Trip Stealth Saddlebags The best motorcycle luggage is one that doesn't interrupt the flow of your two-wheeled work of art. The Stealth Saddlebags from Power Trip complement the looks of your cruiser in a simple yet durable design. Features: MADE IN THE U.S.A. (repair service available) Two year warranty on workmanship and materials Constructed of heavy gauge synthetic leather for superior U.V. resistance, wear and water repellency Sturdy maintenance free material will retain shape, resist stain and mildew Soft touch inner layer will reduce wear on your cargo Lock stitched with anti-rotting heavy duty bonded polyester thread Heavy duty metal Vision YKK zipper for fast detach plus zipper cover to keep road grime out of zipper Solid construction will hold shape for many miles & with heavy loads Quick release buckles are hidden under conventional metal buckle Hard plastic back on XL version Adjustable length Throwover straps fit over under seat or over the fender plus two adjustable side mount straps Available in 3 sizes: Medium (12" L x 6" W x 9.5" H) holds 11.2 Liters Large (15" L x 7" W x 10" H ) holds 17.2 Liters X-Large (18" L x 7" W x 10" H) holds 20.6 Liters Click Here for Additional Luggage Information
Condor Saddlebags from Willie & Max Black synthetic leather with a "winged" design debossed directly into the leather Features easy-to-use hookand- loop closure system Zippered yoke assemblies and convenient removable carrying handle Reinforced with plastic for shape retention Dimensions: Small= 12" W x 9 1/2" H x 5 1/2" D Medium= 14" W x 12" H x 5 1/2" D Large= 16" W x 11" H x 6 1/2" D Click Here for Additional Luggage Information
Chase Harper Phoenix Saddlebags Top access main compartment with 3 fold-down protective flaps, plus full outside zipper pocket storage area for papers, etc. Over-the-seat Velcro attachment with two cinch straps per bag for a secure fit All sides, top and bottom padded with .25" foam insulation Rugged Cordura nylon outer construction with pack cloth interior lining Capacity: 12" x 6" x 9" (per side) .75 cubic feet or 21.2 liters of space Click Here for Additional Luggage Information
Chase Harper Solo Saddlebags Over-the-seat Velcro mounting system 1000 Denier Cordura Plus urethane nylon construction with interior pack cloth finish Full side zipper on each bag .25" interior foam insulation on all sides, top and bottom Top access protected by three fold-down-flat insulated Velcro flaps and covered by a stylish top flat with single buckle closure Capacity: 8.5" x 3.5" x 8" (per side) 8.5" x 8" side pocket 283 cubic inches or 3.9 liters of space Click Here for Additional Luggage Information
Features: Warrior Saddlebags from Willie & Max Black synthetic leather, braided edges,, studs, conchos and fringe combine for a "battle-tough" look Quick-release buckles Zipper can be locked to the D-ring attachments on the bag with small padlock (not included) or a cable tie Zippered yoke assemblies and convenient removable carrying handle Carry handle is unique in that you can carry both bags with one handle Narrow center yoke fits under or over the seat Interior plastic stiffeners for better shape retention Measures= 14" W x 9 1/2" H x 5" D Click Here for Additional Luggage Information
Slant Saddlebags from Willie & Max Unique angle allows more passenger leg room, conforms to rear shock angle Quick-release buckles Zipper can be locked to the D-ring attachments on the bag with a small padlock (not included) or a cable tie Zippered yoke assemblies and convenient removable carrying handle Carry handle is unique in that you can carry both bags with one handle Each has a silver concho with leather lace trim, two-buckle closure and measures 13" W x 12" H x 5" D Click Here for Additional Luggage Information
The Mechanic Saddlebags from Willie & Max Each tool compartment has a slot for 5 wrenches (10 total) and a snap pouch for screwdrivers, pliers or other small tools Larger for the demands of touring Quick-release buckles Zipper can be locked to the D-ring attachments on the bag with a small padlock (not included) or a cable tie Zippered yoke assemblies and convenient removable carrying handle Carry handle is unique in that you can carry both bags with one handle Measures= 14 1/2" W x 12" H x 5 1/2" D Tools not included Click Here for Additional Luggage Information
Power Trip Legend Saddlebags You'll never lack storage with this set of saddlebags from Power Trip. Proudly constructed in the U.S.A., the Legend Saddlebags features a two-year warranty, studded lids, and a soft inner liner to cushion whatever you'll need to carry. Features: MADE IN THE U.S.A. (repair service available) Two year warranty on workmanship and materials Constructed of heavy gauge synthetic leather for superior U.V. resistance, wear and water repellency Sturdy maintenance free material will retain shape, resist stain and mildew Soft touch inner layer will reduce wear on your cargo Lock stitched with anti-rotting heavy duty bonded polyester thread Heavy duty metal Vision YKK zipper for fast detach plus zipper cover to keep road grime out of zipper Solid construction will hold shape for many miles & with heavy loads Quick release buckles are hidden under conventional metal buckle Hard plastic back on XL version Adjustable length throwover straps fit over under seat or over the fender plus two adjustable side mount straps Available in 3 sizes: Medium (12" L x 6" W x 9.5" H) holds 11.2 Liters Large (15" L x 7" W x 10" H ) holds 17.2 Liters X-Large (18" L x 7" W x 10" H) holds 20.6 Liters Click Here for Additional Luggage Information
Fastrax Bags from Dowco are ergonomically designed, featuring a no-slip, scratch-resistant padded backing and straps Made out of rugged 1680-denier polyester with carbon fiber vinyl accents External storage area features draw-tight expansion; padded and heat-shielded attachment straps and lockable security cable also included Come standard with sewn-in rain hoods, adjustable aluminized heat shields, clear electronics storage area with passenger audio/power ports, internal storage pockets and reflective material For convenient carrying, saddlebags come with molded carry handles and backpack sling Waterproof zippers with lockable zipper pulls 16 1/2 x 8 x 7; expands to 16 1/2 x 8 x 11 Click Here for Additional Luggage Information
Account limit of 2052 requests per hour exceeded.
ASTV Eco Twistr LED Flashlight Ascycles BMW Motorcycles Accessories Demo
Saddlemen Desperado Saddlebags Desperado? Saddlebags from Saddleman New nostalgic-look saddlebags available in three sizes Made of a durable combination of materials including genuine leather, marine grade vinyl, chrome-plated brass and tough plastic frame All feature bright chrome studs, chrome buckles and genuine leather straps with lockable, quick-release hidden buckles Available in Throw-Over mounting which quickly releases saddlebags from bike; carry handle included Saddlebag support brackets recommended Jumbo= 18" L x 11.5" H x 6.25" D Large= 15" L x 10.5" H x 5.75" D Medium= 11" L x 9 1/2" H x 5 1/4" D Click Here for Additional Luggage Information
For optional over or under the seat installation of universal saddlebags Available for standard or large universal rigid mount saddlebags Click Here for Additional Luggage Information
National Cycle Cruiseliner Saddlebags Permanently attached lids are hinged in the front and swing forward for easy access to the interior 1-1/4" tight fitting seals conform to the shape of the lid to keep the elements out A keyed push button lock is recessed into the lid Mount to the Cruiseliner Mounting Brackets for a perfect fit
Gears Three Saddlebags Heavy duty 1200-denier Technolast, UV treated polyester construction with polyurethane coating to resist mildew Large main compartment with rigid inner supposrts and two side pockets Rugged rubber handles Covered zippers with rubber puller tabs Reflective back strip Fastex quick release buckles Measures: 19-1/2"L x 11"W x 11"H Click Here for Additional Luggage Information
Moose Racing Expedition Saddlebags Made of semi-rigid formed 600-denier SaddletuffTM and foam shell Unique water-resistant zippers make these bags ideal for nasty weather Nylon stabilizing straps secure bags to a turn signal, bungee hook or frame tube Feature internal mesh pockets, zippered expansions and stylish 3-D accents. Formed shell opens completely with a three sided zipper 17"L x 10"T x 6D and expands to 8"D
Givi Xstream T474 Saddlebags GIVI Xstream Saddlebags are designed with the motorcycle rider in mind. Style and quality make these saddlebags and instant hit for all enthusiasts. Expandable from 26 to 35 liters Rain cover and waterproof zippers keep the wet out Easy carry out dry pack inside saddlebags Reinforced walls to keep shape when empty Dimensions: 10.6"H x 17.7"L x 8.7-11.4"W Click Here for Additional Luggage Information
Tour Master Select Saddlebags Introducing the new Tour Master Select line of motorcycle luggage - designed for motorcyclists who refuse to compromise on features but know a good value when they see it. The Tour Master Select Saddlebags offers features seen on more expensive lines of luggage. Features: Heavy duty, 600 denier Carbolex and 1680 denier ballistic nylon construction Adjustable mounting yoke can be permanently mounted under the seat of some motorcycles Bags have removable neoprene layers to help protect the motorcycle Hinged lid provides easy access to the main compartment and offers additional storage space Phoslite dark colored reflective piping provides nighttime visibility Convenient carrying handles Internal support panels hold the shape of the bag when empty or full Rain/dust cover is included and easily stores in the lid mesh pockets External side pockets offer additional, easy-access storage space Integrates with Tour Master Select Tail Bag 15" L x 5.5" W x 11" H (12 Liters each bag) Click Here for Additional Luggage Information
Condor Saddlebags from Willie & Max Black synthetic leather with a "winged" design debossed directly into the leather Features easy-to-use hookand- loop closure system Zippered yoke assemblies and convenient removable carrying handle Reinforced with plastic for shape retention Dimensions: Small= 12" W x 9 1/2" H x 5 1/2" D Medium= 14" W x 12" H x 5 1/2" D Large= 16" W x 11" H x 6 1/2" D Click Here for Additional Luggage Information
Chase Harper Solo Saddlebags Over-the-seat Velcro mounting system 1000 Denier Cordura Plus urethane nylon construction with interior pack cloth finish Full side zipper on each bag .25" interior foam insulation on all sides, top and bottom Top access protected by three fold-down-flat insulated Velcro flaps and covered by a stylish top flat with single buckle closure Capacity: 8.5" x 3.5" x 8" (per side) 8.5" x 8" side pocket 283 cubic inches or 3.9 liters of space Click Here for Additional Luggage Information
#10300blu](http://www.mycyclemarket.us/images/e/320769036238_0.jpg)
