motorcycle Windshield Bags

Honda GL1100 Interstate?
I have a 1981 GL100 Honda Goldwing Interstate...It has been sitting for several years under tarp. Engine is seized from water in crankcase. Complete motorcycle is there except for an AM/FM factory radio which I put in my 1982 Goldwing. Fairing is cracked, but, salvageable. Saddle bags, windshield intact. What would be a decent asking price for the 1981 AS IS.. or would I be better off "parting it out"...?
The engine is seized from water in the crankcase? By water, do you mean coolant? Did the engine lock up because of the coolant before you parked it? If so, the engine may very be not much more than a boat anchor. When engines seize because of antifreeze in the crankcase, they can be glued so tight you'll never get it to turn again and I'm talking from experience. Or do you mean water as in condensation or rain water? That kind of deal can still be a real bear because of corroded bearings, anything ferrous rusted. Whether you have water in the crankcase or not, moisture in the form of humidity can enter through a carb and open intake valve or exhaust and open exhaust valve. That moisture has a way of making aluminum pistons corrode around the piston rings, swelling the tightly around the rings. To remove the pistons, you end up using a oak block and sledge hammer, assuming you can get the connecting rod disconnected from the crankshaft. I've done this also and on a CB 450, the rings were swelled to tightly that they split the part of the cylinder sleeve that extended below the cylinder block. By the time you get the piston driven out, it's ruined and even if the top isn't bashed in, you'll never get the rings off because of the corrosion. Even if the engine weren't locked up, if it's set outside under the tarp, you can bet that at least one intake and one exhaust valve have been open and the valve seat is rusted and pitted.
What I'm saying is, you're either going to have to part the bike out and figure many of the engine internals won't be salvagable. To get it going before you sell it, you better figure on spending $500 bucks for a used engine because that will be cheaper than trying to repair the existing engine. You'll spend approximately $100 on a gasket set alone and that doesn't include any parts.
I'm a competent mechanic and have rebuilt-restored several full dressers before. Without knowing how bad the engine is and assuming the worst, a 29 year old bike with a busted fairing (I've repaired them before too) and missing radio is going to also need tires and most likely fork seals. Does it have rear air shocks? If so, the seals may be dried out and leaking on them too, making them useless. Since the radio is out, I wouldn't be surprised if the mice have been inside the fairing chewing on the wires (been there, done that). With my past experience rebuilding bikes and knowing what I know, I'd be hard pressed to give you $300. If you can get $500, make sure it's cash, sign the title quickly and let the buyer know that once you have the money and he has the title, it's a done deal and there's no going back. Just make sure the buyer isn't a close friend or family member.
![]() |
![]() | 2pc Motorcycle Leather Sissy Bar Bag & Windshield Bag Set For Harley | ![]() | ![]() | US $29.95 | 9d 19h 31m |
![]() | Motorcycle Heavy Duty Leather Windshield Bag for Harley Softail Sportster Dyna | ![]() | ![]() | US $18.50 | 2d 20h 11m |
![]() | 2pc Motorcycle Leather Sissy Bar Bag & Windshield Bag Set For Honda | ![]() | ![]() | US $29.95 | 9d 19h 25m |
![]() | 2pc Motorcycle Leather Sissy Bar Bag & Windshield Bag Set For Yamaha | ![]() | ![]() | US $29.95 | 9d 19h 32m |
![]() | 2pc Motorcycle Leather Sissy Bar Bag & Windshield Bag Set For Suzuki | ![]() | ![]() | US $29.95 | 9d 19h 33m |
![]() | 2pc Motorcycle Leather Sissy Bar Bag & Windshield Bag Set For Kawasaki | ![]() | ![]() | US $29.95 | 9d 19h 34m |
![]() | 3pc Motorcycle Luggage Set/Windshield Bag/Tool Bag/Sissy Bar Bag/GREAT BUY! | ![]() | ![]() | US $8.99 | 6d 18h 58m |
![]() | Premium Motorcycle Leather Windshield Bag Fits Harley Sportster Softail New | ![]() | ![]() | US $19.79 | 10d 14h 29m |
![]() | A3581 3 POCKET PLAIN MOTORCYCLE WINDSHIELD BAG | ![]() | ![]() | US $29.50 | 19d 7h 29m |
![]() | 3 POCKET MOTORCYCLE WINDSHIELD GEAR BAG STUDDED | ![]() | ![]() | US $59.99 | 5d 1h 20m |
![]() | Motorcycle Windshield Bag Studded 3 Pocket Style | ![]() | ![]() | US $33.95 | 15d 7h 25m |
![]() | MOTORCYCLE CRUISER BIKER WINDSHIELD BAG PLAIN SMALL | ![]() | ![]() | US $17.95 | 3d 23h 33m |
![]() | Motorcycle 3 Pocket Windshield Bag Plain | ![]() | ![]() | US $29.95 | 27d 2h 32m |
![]() | MOTORCYCLE WINDSHIELD BAG WITH 3 POCKET | ![]() | ![]() | US $29.95 | 15d 20h 5m |
![]() | WINDSHIELD BAG TOOL BAG BRAIDED TRIM HARLEY HONDA YAMAHA CUSTOM MOTORCYCLE NEW | ![]() | ![]() | US $15.57 | 14h 54m |
![]() | NEW UNIK LEATHER MOTORCYCLE WINDSHIELD BAGS WITH REINFORCEMENT STRIP | ![]() | ![]() | US $32.00 | 5d 5h 41m |
![]() | STUD 3 POCKET MOTORCYCLE BIKE WINDSHIELD TOOL GEAR BAG | ![]() | ![]() | US $32.95 | 14d 18h 4m |
![]() | MOTORCYCLE WINDSHIELD 3 COMPARTMENT TOOL GEAR BAG | ![]() | ![]() | US $41.95 | 4d 6h 23m |
![]() | New Premium Motorcycle Leather Windshield Bag Fits All | ![]() | ![]() | US $19.79 | 12d 18h 50m |
![]() | 4pc Motorcycle Heavy Duty Barrel Backpack Sissy Bar Windshield Bag for Harley | ![]() | ![]() | US $59.95 | 10d 14h 32m |
![]() | Motorcycle Windshield Bag | ![]() | ![]() | US $39.95 | 2d 1h 25m |
![]() | 3 pc Set Motorcycle Windshield Tool and Sissybar bag | ![]() | ![]() | US $54.99 | 9d 4h 24m |
![]() | 3 pc Set Motorcycle Windshield Tool and Sissybar bag While supplies last | ![]() | ![]() | US $54.99 | 9d 4h 24m |
![]() | Leather 3 Pocket Motorcycle Plain Windshield Bag | ![]() | ![]() | US $32.95 | 27d 21h 15m |
![]() | 3 Pocket Leather Like P.V.C. Motorcycle Windshield Bag By All State | ![]() | ![]() | US $47.95 | 27d 23h 25m |
![]() | MOTORCYCLE BIKE WINDSHIELD TOOL BAG FITS HARLEY SOFTAIL | ![]() | ![]() | US $14.20 | 11d 18h 15m |
![]() | MOTORCYCLE WINDSHIELD TOOL BAG FITS HARLEY SOFTAIL BIKE | ![]() | ![]() | US $13.95 | 11d 20h 31m |
![]() | .WINDSHIELD MOTORCYCLE BAG WITH ZIPPER & VELCRO CLOSURE | ![]() | ![]() | US $19.99 | 8d 18h 52m |
![]() | MOTORCYCLE WINDSHIELD BAG W/3 POCKETS LARGE NEW | ![]() | ![]() | US $44.99 | 8d 4h 31m |
![]() | 4pc Motorcycle Barrel Backpack Sissy Bar Windshield Bag for Honda New | ![]() | ![]() | US $59.95 | 4d 16h 22m |
![]() | PLAIN BLACK MOTORCYCLE WINDSHIELD BAG WITH METAL BRACKET NEW WS-11 | ![]() | ![]() | US $21.99 | 9d 5h 38m |
![]() | MOTORCYCLE WINDSHIELD BAG WITH STUDS 3 POCKET | ![]() | ![]() | US $29.95 | 17d 19h 15m |
![]() | Motorcycle Small Windshield Bags Plain 7" x 4" x 3" | ![]() | ![]() | US $19.95 | 7d 19h 1m |
![]() | MOTORCYCLE WINDSHIELD 3 COMPARTMENT STUD TOOL GEAR BAG | ![]() | ![]() | US $40.80 | 12d 12m |
![]() | Cruiser Motorcycle Windshield Storage Bag With Braided Accent 10" Long x 5" Tall | ![]() | ![]() | US $18.50 | 23h 30m |
![]() | 3 Pocket Leather Like P.V.C. Studded Motorcycle Windshield Bag By All State | ![]() | ![]() | US $49.95 | 28d 15h 58m |
![]() | Motorcycle Braided Small Windshield Bag 7" x 4" x 3" | ![]() | ![]() | US $19.95 | 7d 19h 14m |
![]() | SM PLAIN LEATHER MOTORCYCLE WINDSHIELD TOOL BAG UNIK | ![]() | ![]() | US $25.15 | 6d 16h 11m |
![]() | Leather 3 Pocket Motorcycle Windshield Bag Studded | ![]() | ![]() | US $35.95 | 27d 21h |
![]() | PLAIN 3 POCKET MOTORCYCLE BIKE WINDSHIELD TOOL GEAR BAG | ![]() | ![]() | US $33.95 | 23d 21h 17m |
| Powered by phpBay Pro |
| | Windshield Bag $73.95 T-Bags Windshield Bag This sleek design from T-Bags gets you on the road with small stuff you'll need Three streamline pockets for iPods and other small items Made of tough embossed PVC with UV inhibitors for sun protection Easy to install and custom cut to fit all 4 in. and taller FLHT windshields Click Here for Additional Luggage Information |
| | Classic Handlebar-Windshield Bag $17.99 River Road Classic Handlebar Windshield Bag River Road Handlebar/Windshield Bags feature synthetic leather construction that's so real, you'll have to look twice Pipe-edged for better looks Front flap closes securely with hook-and-loop closure Attaches securely to handlebar with nylon straps Includes 1 year manufacturers warranty Dimensions: 8"W x 4"H x 2-1/2"D Click Here for Additional Luggage Information |
| | Braided Handlebar-Windshield Bag $19.99 River Road Braided Handlebar Windshield Bag River Road Handlebar/Windshield Bags feature synthetic leather construction that's so real, you'll have to look twice Pipe-edged for better looks Front flap closes securely with hook-and-loop closure Attaches securely to handlebar with nylon straps Includes 1 year manufacturers warranty Dimensions: 8"W x 4"H x 2-1/2"D Click Here for Additional Luggage Information |
| | Studded Handlebar-Windshield Bag $19.99 River Road Studded Handlebar-Windshield Bag River Road Handlebar/Windshield Bags feature synthetic leather construction that's so real, you'll have to look twice Pipe-edged for better looks Front flap closes securely with hook-and-loop closure Attaches securely to handlebar with nylon straps Includes 1 year manufacturer's warranty Dimensions: 8"W x 4"H x 2-1/2"D Click Here for Additional Luggage Information |
| | Road King Windshield Bag $83.95 T-Bags?Road King?Windshield Bag T-Bags provides superior value by combining convenience, quality and versatility into every product they put onto the market. The Heritage Windshield bag is no different, crafted from 1680d, fade-resistant nylon and YKK zippers and hardware this bag is made to last and if it doesn't T-Bags has a lifetime warranty.?It's time to add cargo capacity and style to your Harley with T-Bags luggage. For the Harley-Davidson Road King with quick release 16",18" or 22" windshield and OE handle bars Adds 500 cu. in. of capacity to your machine 4- interior pockets make it easy to keep your cargo organized and secure 2 wire grommets make using electronic devices hassle-free Easy installation...this bag attaches in minutes Does not fit King-Size Nostalgic Detachable Windshields Not made for bikes with tall ape hangers 9" X 14" X 4.25" Lifetime Warranty Click Here for Additional Luggage Information |
| | Take Along Small Windshield Bag $51.99 Features: Take Along Small Windshield Bags from Willie & Max Black-synthetic leather construction Great for holding cell phone, keys, garage door opener, sunglasses, etc Features a quick-detach mounting system Take the bag along to safely keep your possessions with you at all times Easily mounts to the most windshields that have horizontal support strap Includes accessory/shoulder strap Small= 10 1/2" W x 4 1/4" H x 2 1/2" D Click Here for Additional Luggage Information |
| | Windshield Decal $8.95 Thor Windshield Decal 30" Thor Windshield Decal |
| | Sportbike Windshield $70.99 Maier Sportbike Windshield Tough, molded acrylic windshield is an exact OEM replacement Windshields are predrilled for stock mounting holes and can be mounted with stock hardware |
| | Turbo Windshield $138.95 Slip Streamer Turbo Windshield Excellent wind protection Four point mounting system Fits round headlight models only |
| | The Shooter Windshield $157.95 The Shooter Windshield from Memphis Shades Handlebar mount windshield Looks great on today's wide-body motorcycles Measures 19" W x approximately 14" H above headlight Fits most round headlights Made of Lucite for excellent optics and durability Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 1" and 7/8" handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws **Note: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield **Note: The following models require 1 1/4" handlebar clamp: Click Here to Select Your Application Suzuki: M109 1800 '06-08 Also Available: Hell Cat Windshield Demon Windshield Classic Deuce Windshield Replacement Plastic for The Shooter Windshield |
| | UTV Windshield $199.99 Seizmik UTV Windshield Strong, high-impact, shatter resistant acrylic Can be installed with or without the soft top Easy installation and removal |
| | Wave Windshield $116.99 National Cycle Wave Windshield Quality 4.5mm Quantum hardcoated polycarbonate Available in 3 sizes to suit your needs 3 year unbreakable manufacturer warranty |
| | Demon Windshield $183.95 Demon Windshield from Memphis Shades Handlebar mount windshield Measures 21" W x 18" H above headlight Fits most round headlights Made of Lucite for excellent optics and durability Available in clear, gradient black and solar tint Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 1" and 7/8" handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws **Note: The following models require 1 1/4" handle bar clamp: Click Here to Select Your Application Suzuki M109 1800 '06-08 **Note: The following models require 1" handle bar clamp: Click Here to Select Your Application Yamaha V-Star 650 Custom/Classic '98-05 **Note: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield Also Available: Hell Cat Windshield The Shooter Windshield Classic Deuce Windshield Replacement Plastic for Demon Windshield |
| | Scooter Windshield $94.99 Sportech Scooter Windshield From the windshield innovators comes a fresh approach to scooter wind protection. This windshield kit features a set of unique, stylish mounting arms that secure the polycarbonate windshield to each mirror-perch for a semi-universal fit. Sportech scooter windshields are custom formed from premium polycarbonate which, unlike acrylic, is shatter-proof and provides superior optical clarity. Our tall windshield offer a unique engineered profile designed to force airflow up and over the rider?creating a large air pocket. This design feature works in conjunction with the superior structural stability inherent with polycarbonate to produce a winning combination of form and function. Superior materials and superior design means Sportech scooter windshields can be made much thinner and lighter, yet maintain their shape and deliver optimal wind protection. Designed to be somewhat universal, Sportech scooter windshields will fit many models and are guaranteed to fit specific models from Yamaha, Honda and Kymco. Clean design Easy installation Custom formed from premium polycarbonate Engineered profiles offer excellent wind protection while maintaining a sleek look Available in low(12-1/4" x 19") and tall (19" x 19"), clear and tint (see multi view) Strong powder-coated steel brackets hold the windshield securely to the vehicle Premium chrome mounting hardware |
| | Windshield Trim $149.95 Battistinis Windshield Trim Replaces stock trim with the famous Battistinis look Constructed from 6061 T-6 billet aluminum Available in chrome or black finish Simple bolt-on installation |
| | Gladiator Windshield $168.99 National Cycle Gladiator Windshield Finally a custom look in windshields that is worthy of your bike, The Gladiator Windshield. The clean appearance of this unique bracket is achieved by mounting directly to the top clamp, leaving the bike's handlebars and forks uncluttered. Dual Pivot Action allows mounting bracket to be fully adjustable Hard coated polycarbonate material Smooth radius edges Available in rich Dark Tint or Light Tint; wrinkle black or chrome hardware included 3-Year Warranty against breakage |
| | Half Windshield $134.99 Quadboss Half Windshield Get a little protection when you are out in the hills or on the dunes. Quadboss brings you quality windshield for your UTV/side by side. Manufactured from premium .177 thick optically clear polycarbonate material Rubber-coated stainless steel mount straps are used to attach to roll cage Trailerable at normal highway speeds Includes instruction sheet and all mounting hardware needed for assembly Approximately 17" tall depending on model |
| | Replacement Windshield Hardware Kit $29.95 Moose Racing Replacement Windshield Hardware Kit Replacement Hardware Kit for Moose ATV Windshield |
| | ATV Windshield $101.95 Moose Racing ATV Windshield Made from .100" polycarbonate material Rigid four point mounting hardware with breakaway design Quick disconnect handlebar clamps for easy removal Measures: 19"H x 37.5"L With or without headlight cut out available for most ATV's |
| Account limit of 2052 requests per hour exceeded. |
How to make a Windshield bag




































































































































